Sunday 15 February 2015

Guild of Shadows: Character Builder and the Thief Edge

One of the Kickstarter projects I backed that I've been particularly looking forward to getting my hands on is Guild of Shadows - a dark urban fantasy setting based around the nefarious activities of a thieves guild.

With the project now so close to completion, I was recently hired to take a look over their mechanics, making any final edits for balance and consistency. As I'm a big fan of the genre, I also took the opportunity to propose a further 14 Edges and 3 Hindrances, all inspired by various rogues from history or fiction.

I've obtained permission to produce a web-based character creation tool for the setting, which you can access here:

Guild of Shadow Character Builder.

I'd also like to give an overview of a potential problem with the Thief Edge that some may have already wondered about, along with my solution...

The Thief Edge in a Thief Setting

Savage Worlds has two Edges in the core rule book that provide a Stealth bonus: Thief gives +2 Stealth in urban areas, while Woodsman gives +2 Stealth in rural locations.

The Thief Edge is particularly nice in that it also boosts Climbing and Lockpicking, as well as trap-related uses of the Notice and Repair skills. The large number of bonuses are somewhat balanced by the fact that it's usually a fairly niche Edge, and has some very tough requirements.

However because Guild of Shadows is an urban thief-focused setting, the Thief Edge is no longer even remotely niche - it boosts several of the most useful skills, and is the only way to get a Stealth bonus. When I ran a similar style of campaign in the past, most of the players invested in Thief simply because it was so useful.

But it gets worse. The tough requirements mean that each Thief also needs to boost one attribute, and assign around half of their skill points in a specific way, leaving them much less room to differentiate themselves from each other - and even if they're able to stand out in smaller ways, because most of their starting points are tied up in heavily boosting the same set of abilities, they're still likely to feel quite similar to each other (at least mechanically-speaking).

Removing the Thief Edge wasn't an option, because Guild of Shadows is designed to be slottable into existing settings and campaigns if the GM wishes, and such campaigns could well have characters who have already taken the Edge.

So I approached the problem from a different angle, and added two new Edges: Highwayman and Urban Ranger. Like Thief, they are Professional Edges, which means their bonuses don't stack with each other - thus there are now three different Edges which grant the much-coveted +2 Stealth bonus, each of which provides other benefits as well, and Urban Ranger also has a 'backdoor' through another Edge. The end result is that characters in Guild of Shadows can obtain that +2 Stealth bonus without sacrificing diversity.

Thursday 12 February 2015

Expanded Rule: Disguise

There are no explicit rules for disguises in Savage Worlds - somewhat ironically, not even the Disguise power allows you to simply disguise your appearance, it only lets you impersonate a specific person.[Reference]

The recommended approach is usually to treat disguise as a Persuasion roll (to convince people that you're someone else), or in some situations a Stealth roll (if you just want to appear nondescript).[Reference]

However a recent discussion about Stealth made me wonder if perhaps the disguise mechanics could be a bit more clearly defined. In particular, applying the active/inactive guard concept (which is normally used for sneaking) to disguises would seem to make a lot of sense.

My proposal is therefore as follows:

Disguise

There are typically two parts to a disguise. The first part is your bearing and mannerisms, which are covered by the Persuasion skill, and the second is your physical appearance, which is covered by the Stealth skill. You don't roll when applying a disguise, instead you roll when other people interact with you.

There are two types of observer, "attentive" and "inattentive". Inattentive observers are those who aren't interacting with you or paying any particular attention to you. Under normal circumstances a standard TN 4 Persuasion roll is sufficient to maintain your disguise against inattentive observers, but on a failure you draw attention to yourself; those nearby become attentive observers.

Attentive observers make an opposed Notice roll against your Persuasion (typically only once per scene unless something occurs to draw additional scrutiny), and if they succeed they notice that you're acting strangely. They can then make another opposed Notice roll against your Stealth to try and penetrate your disguise and determine your identity - or at the very least, they will recognise that you're trying to disguise your appearance, and notice any distinctive features.

If an observer beats your Persuasion but not your Stealth, they will only realise you're an imposter if you're impersonating a specific person, and they're familiar with that person. Otherwise they'll usually just do a double take, then continue with whatever they were doing.

Modifiers
  • Without the necessary tools (such as makeup and suitable clothing) you suffer a -2 penalty to your disguise rolls.
  • Charisma bonuses from Attractive, Very Attractive and Noble do not typically apply to Persuasion when used for disguise rolls, except in specific situations (e.g., impersonating another attractive person when you have Attractive, or using your Noble manners and bearing to impersonate another nobleman).
  • If you are wearing clothing that partially conceals your appearance (such as a deep hood, or a masquerade ball mask) you receive a +2 bonus to your disguise rolls, as long as such clothing doesn't appear out of place.
  • If you attempt to imitate a specific person, anyone closely familiar with that person is automatically treated as an attentive observer, and receives a +2 bonus to their Notice roll against your Persuasion. This bonus increases to +4 for a lover or close family member.
  • Anyone who is very familiar with you (such as a friend, relative, or sworn enemy) receives a +2 bonus to their Notice rolls against both your Persuasion and Stealth.
  • Other situational modifiers may apply at the GM's discretion, although these should usually be limited to +1/-1 for a minor advantage or disadvantage, and +2/-2 for a major advantage or disadvantage.
New Edge

Here's a new Edge to take advantage of the expanded disguise rule:

Master of Disguise (Professional)
Requirements: Novice, Persuasion d8, Stealth d8
  You receive a +2 bonus to Persuasion and Stealth when making disguise rolls. If you apply a disguise to someone else, they also receive a +2 bonus to Stealth (but not Persuasion) when making disguise rolls; this bonus does not stack with other Stealth bonuses granted by Professional Edges.

Wednesday 11 February 2015

Savage Archery: Overview and design insight

Savage Insider volume 2 issue 2 has been released, and it includes my first "officially" published article: Savage Archery. Here's an overview of my article, for anyone who's not yet bought a copy of Savage Insider, along with some insight into the weapon design guidelines.

Savage Archery gives an overview of ranged combat, along with some tips and tactics for creating and playing an archer. There are also three pre-generated starting characters: Egil, Robin Hood, and William Tell.

After that comes a two-part weapon design system: Choose a type of bow (self, composite or compound) or crossbow (standard, arbalest, repeating or pistol), and then apply a draw-string pull (light, medium, heavy or great). The section finishes up with several archery accessories, such as tabs, bracers, and sights.

The next section covers arrows, which consist of a shaft (wooden, footed, fiberglass, aluminum, or carbon), head (pile, soft, bodkin, broadhead, blunt, fire cage, forked, signal, bowfishing, or quarrel) and fletching (handled as cosmetic trappings, to give each archer a unique flavour).

Edges come next (Born to the Bow, Crossbow Speed Shooting, Fast Shooter, Improved Fast Shooter, Precision Shooting and Stab and Shoot) along with a Hindrance (Reckless Shot).

Finally there's a section on botches, which includes a critical failure table for archers.

Backward Compatible Bows

One of my design goals with the bow and crossbow creation system was that the weapons should be backward compatible with those in SWD. This was a bit tricky, because the English longbow costs $200, while the standard bow costs $250. After some consideration I realised that it's never specified what type of bow the "bow" is - if it were a composite bow, then of course it would make sense for it to cost more. Following that assumption, each weapon can be created as follows:
  • The default "bow" would be a medium-pull composite bow, using soft headed arrows with wooden shafts. The medium-pull grants the 12/24/48 range and the Strength d6 requirement, as well as the weight and price.
  • The "English longbow" would be a heavy-pull self bow, also using soft headed arrows with wooden shafts. The heavy-pull grants the 15/30/60 range and the Strength d8 requirement, as well as the weight and price, however the price of self bows is reduced to 40%.
  • The "crossbow" would be a heavy-pull standard crossbow, using square-headed quarrels (AP 2 for a heavy-pull weapon). They'd be a bit less likely to break than the SWD bolts, but that's the only difference. The heavy-pull grants the 15/30/60 range, but crossbows always reduce their Strength requirement by 1 die step (in this case to d6) and double their weight (to 10).
But of course you're no longer limited to those three weapons. You could create a medium-pull self bow for example, it would have the same stats as the regular bow but cost only $100, however it would be long and cumbersome, and therefore difficult to use from a mount. Or you could create a heavy-pull composite bow for $500, it would be as as powerful as the English longbow but smaller and easier to carry around (a great choice for a mounted archer).

You could even create a medium-pull standard crossbow - it would have range 12/24/48, require Strength d4, have a weight of 6 and cost $250, but the quarrels would only have AP 1 (due to the weaker pull).

Superior Arrows

I choose to justify the AP of the crossbow through its quarrels rather than as an innate bonus of the weapon itself - so the quarrel is what gives the crossbow its AP 2. This means an archer can also gain AP (by using hardened bodkin arrowheads). However arrowheads only provide their full bonus when using a heavy-pull bow, and most people are only strong enough to use heavy-pull crossbows (because of the lower Strength requirement).

While the archer can raise his Strength to d8 to utilise a heavy-pull bow, the crossbowman can use that same advance to take the new Crossbow Speed Shooting Edge, so I think the two options (archer and crossbowman) should balance out.

Disclaimer: The compound bow also reduces the Strength requirement in the same way as a crossbow, however it's a modern weapon, and should therefore be compared with modern crossbows (which can be fitted with optic scopes).

Repeating Crossbows

Right from the beginning, I knew I wanted to include rules for Chinese repeating crossbows, however I wanted them to be at least reasonably realistic. An article I'd read suggested that a repeating crossbow could fire 10 bolts in 15 seconds, which is an average of 1 bolt every 1½ seconds. A round in Savage Worlds lasts 6 seconds, which meant the repeating crossbow should be able to fire 4 bolts per round.

The Automatic Fire rules state that the Rate of Fire (RoF) is multiplied by the number of Shooting dice to determine how much ammunition is actually used. Thus by giving the repeating crossbow RoF 2, it will indeed fire 4 bolts per round.

However the article also described how the repeating crossbow could be modified to fire 2 bolts at a time. While the Double Tap maneuver might seem a thematic fit for such an option, I felt it would make the modification a no-brainer, so instead I had it give a slight damage increase along with a range decrease.

The modified variant also allowed me to justify the Suppressive Fire maneuver. Suppressive Fire uses five times the RoF of the weapon, which in this case would be 10 bolts in a 6 second round. While that's fine for guns, the Chinese repeating crossbow is simply not able to fire bolts that fast - however the modified version can shoot twice as many bolts (8 in 6 seconds), which I felt was close enough.

Summary

Savage Archery was a fun article to write, and quite a lot of thought went into the weapon design system. If you like my other fan stuff then I think you'll enjoy this article as well.

But of course that's just one article, and Savage insider is packed with loads of excellent content by a number of different authors. Please do check it out if you haven't already.